Konica Minolta AU-211P - Manual (Page 33)

How to Use the Authentication Unit 3
AU-211P 32
3.4.2 Related Settings
This section explains how to configure the SMB TX settings on the MFP that
supports this system.
Client Settings
Configure the setting to perform SMB TX.
On the MFP control panel, press the [Utility/Counter] key, and then
[Administrator Settings] - [Network Settings] - [SMB Settings] - [Client
Settings].
Item Description
ON/OFF Select [ON].
SMB Authentication
Setting Select the SMB TX authentication method.
When performing SMB TX for a folder accessible in the
Active Directory domain environment, select [Kerberos].
When performing SMB TX in the environment in which
the Active Directory and NT domains are used together,
select [Kerberos/NTLMv2/v1].
User Authentication
(NTLM) Select whether or not the NTLM user authentication is
performed.
DFS Setting To perform SMB TX in a DFS (Distributed File System)
environment, select [Enable].