Konica Minolta AU-211P - Manual (Page 10)

Getting Started 2
AU-211P 9
2.3 Pre-Setting
To use this system, pre-configure the following settings on the MFP.
- Configuring network settings (page 9)
- Registering Active Directory for authentication (page 11)
- Correcting the MFP time (page 12)
- Registering the DNS server associated with Active Directory
(page 13)
- Specifying the PIV transitional mode (page 14)
- Configuring settings for verifying the Active Directory certificate
(page 15)
2.3.1 Configuring Network Settings
Configure the basic settings required to use the MFP in a network
environment.
TCP/IP Settings
On the MFP control panel, press the [Utility/Counter] key, and then
[Administrator Settings] - [Network Settings] - [TCP/IP Settings].
IPv4 Settings
Item Description
ON/OFF Select [ON].
Item Description
IP Application Method Select whether to automatically retrieve the IP address
or directly specify it.
Auto Input When automatically retrieving the IP address, select the
automatic retrieval method.
IP Address When directly specifying the IP address, enter the IP
address of the MFP.