Konica Minolta AU-211P - Manual (Page 29)

How to Use the Authentication Unit 3
AU-211P 28
3.3.3 Handling Address Search (LDAP)
Use the Fax/Scan screen on the MFP control panel, and press [Address
Search]. The procedures can vary depending on whether a single or multiple
LDAP servers are registered.
2
Note
If address search (LDAP) setting incorrectly configured properly,
[Address Search] will not appear. Check that the address search (LDAP)
setting is configured correctly.
When a single LDAP server is registered
Press [Begin Authentication] to perform authentication with the Kerberos
authentication ticket and connect to the LDAP server.
After connecting to the LDAP server, select the desired method to search for
the destination.
Authentication Type Select the authentication method to connect to the
LDAP server.
When connecting to the LDAP server using the
Kerberos authentication method, select [GSS-
SPNEGO]. Then specify the domain name of the Active
Directory in [Domain Name].
When specifying the LDAP server with an anonymous
user enabled, you can select [Anonymous].
Referral Setting Select whether to use the referral function. Match the
LDAP server environment.
Domain Name Specify the domain name to log in to the LDAP server
(up to 64 characters).
Item Description