Konica Minolta bizhub 364e - Manual (Page 64)

How to Use the Authentication Unit 3
AU-211P 63
3.9.3 Using Scan To Home
The following explains how to use Scan To Home on the MFP.
!
Detail
If the correct settings are configured to use Scan To Home, [Home]
appears on the Fax/Scan screen to send data to the user's Home folder.
1
Tap [Scan/Fax].
2
Tap [Home].
3
Configure Scan option settings as necessary.
4
Load the original and press the [Start] key on the control panel.
This scans the original and sends data to the user's Home folder.
2
Note
For details on scan conditions, refer to the User's Guide [Scan] supplied
together with the MFP.