3 pre-setting, 1 configuring network settings, Pre-setting – Konica Minolta bizhub 364e User Manual
Page 11: Configuring network settings
Getting Started
2
AU-211P
10
2.3
Pre-Setting
To use this system, pre-configure the following settings on the MFP.
-
Configuring network settings (page 10)
-
Registering Active Directory for Authentication (page 12)
-
Correcting the MFP time (page 13)
-
Registering the DNS server associated with Active Directory
(page 14)
-
Specifying the PIV transitional mode (page 16)
-
Configuring settings for verifying the Active Directory certificate
(page 17)
2.3.1
Configuring Network Settings
Configure the basic settings required to use the MFP in a network
environment.
TCP/IP Settings
On the MFP control panel, tap [Utility] - [Administrator Settings] - [Network
Settings] - [TCP/IP Settings].
IPv4 Settings
Item
Description
ON/OFF
Select [ON].
Item
Description
IP Application Method
Select whether to automatically retrieve the IP address
or directly specify it.
Auto Input
When automatically retrieving the IP address, select the
automatic retrieval method.
IP Address
When directly specifying the IP address, enter the IP
address of the MFP.