Konica Minolta bizhub 364e - Manual (Page 34)

How to Use the Authentication Unit 3
AU-211P 33
3.3.3 Handling Address Search (LDAP)
Use the Fax/Scan screen on the MFP control panel, and tap [Addr. Search]-
[Search]-[Address Search (LDAP)] or [Adv. Search (LDAP)]. This section
explains examples of procedures when [Address Search (LDAP)] is selected.
2
Note
If address search (LDAP) setting incorrectly configured properly,
[Address Search (LDAP)] and [Adv. Search (LDAP)] will not appear. Check
that the address search (LDAP) setting is configured correctly.
1
When selecting an LDAP server to search for a target address, tap the
list icon next to [Server Name].
2
Select an LDAP server in which to search for a target address, and tap
[OK].
– If necessary, you can select multiple LDAP servers.