Konica Minolta bizhub C10X - Manual (Page 128)

Network Connection 118
7
Restart the printer.
8
Print a configuration page to verify that the correct IP address, subnet
mask, and gateway have been set.
9
After the printer’s message window is initialized, install the printer driver.
ADDR=0 .0 .0 .0
OK=SEL
Use the keypad to input each number.
A single digit number, such as “1”, cannot be input as “001”. Align the num-
ber on the left and input “1” as “1 _ _”. Use the * and ) keys to move
between triplets.
The Cancel/C key can also be used for deleting. To cancel Gateway menu,
hold down the Cancel/C key for more than one second, and then press the
Cancel/C key again after all settings have been cleared.
Main screen
Press this
key . . . (until) the message window displays . . .