Konica Minolta bizhub C10X - Manual (Page 127)

Network Connection 117
3
Display the NETWORK SETTING menu.
4
If you don’t want to set the subnet mask or gateway, go to step 8.
If you don’t want to set the subnet mask, but you do want to set the gate-
way, go to step 6.
If you want to set the subnet mask, follow these steps.
5
Display the NETWORK SETTING menu.
6
If you don’t want to set the gateway, go to step 8.
If you want to set the gateway, follow these steps.
Main screen
Press this
key . . . (until) the message window displays . . .
2 SUBNET MASK?
OK=SEL
SUB=255.255.255.0
OK=SEL
Use the keypad to input each number.
A single digit number, such as “1”, cannot be input as “001”. Align the num-
ber on the left and input “1” as “1 _ _”. Use the * and ) keys to move
between triplets.
The Cancel/C key can also be used for deleting. To cancel Subnet Mask
menu, hold down the Cancel/C key for more than one second, and then
press the Cancel/C key again after all settings have been cleared.
Main screen
Press this
key . . . (until) the message window displays . . .
3 GATEWAY?
OK=SEL
Press this
key . . . (until) the message window displays . . .