Konica Minolta IC-308 - Manual (Page 72)

5-24
5.2 Image Quality Adjustment
Particular adjustment
If a particular adjustment is required, for example, before printing out an image with a higher level of quality or when
the expected chromogenic effect has not been obtained as expected, adjust the following items:
Reference
For details about the adjustment procedure, refer to the HTML User's Guide.
NOTICE
NOTICE
Precaution on using Color Density Control
To use [Each Paper Type Color Adj.] in "Color Density Control", carry out [Each Paper Type Color Adj.] before starting
this procedure, then configure a tray setting.
For details, refer to the HTML User's Guide.
Ad-
just-
ment
order Menu item Description Tips
1 Gamma Automat-
ic Adj. Adjusts the curve of the output density against the in-
put density.
This affects the brightness and contrast.
On the [MACHINE] screen, select [Adjustment] - [Exe-
cute Adjust Operation] - [Gamma Automatic Adj.] to
execute processing. HTML User's Guide
2 Maximum Density
Adjustment Changes the maximum density adjustment value
when the measurement density that was obtained af-
ter calibration does not match the reference adjust-
ment value.
[Administrator Setting] - [System Setting] - [Expert
Adjustment] - [Process Adjustment] - [Maximum Den-
sity Adjustment] HTML User's Guide
3 Color Density
Control Executes automatic calibration.
On the [MACHINE] screen, select [Adjustment] -
[Color Density Control] - [Basic Setting] or [Color Den-
sity Manual Control] to carry out the adjustment. p. 5-14
4 Printer controller
calibration Executes manual calibration. Use Fiery Command
WorkStation. p. 5-19