Konica Minolta IC-308 User Manual
Page 68
5-20
5.2
Image Quality Adjustment
E
Click [Continue].
A chart is printed out in a matter of time after this
machine started running.
F
Click [OK].
G
Securely place EFI Spectrometer ES-
1000 in the calibration cradle, then click
[Continue].
H
Load the measurement page on the measurement guide plate.
I
Follow the instructions on the
measurement window to measure color
strips in sequence.
-
Place approximately 10 sheets of plain paper
beneath the measurement page or use a
backer board, before starting measurement.
-
Hold down the measurement button of EFI
Spectrometer ES-1000. After you hear a
beep, slide it while holding down the
measurement button.
Slide EFI Spectrometer ES-1000 to the end
of strip, then release the measurement
button.
-
For details about how to use EFI
Spectrometer ES-1000, refer to the manual supplied with this machine.