Executing calibration, Color density control, Auto setting of color density control – Konica Minolta IC-308 User Manual
Page 62: Executing calibration -14, Color density control -14, Auto setting of color density control -14
5-14
5.2
Image Quality Adjustment
)
Executing calibration
This machine provides the following two methods to carry out calibration.
Using an optional Relay Unit RU-511 (recommended):
Set [Color Density Control] to ON to periodically carry out calibration (page 5-14).
Using Fiery Command WorkStation and a colorimeter:
Make adjustments manually based on the calibration timing (page 5-13) (page 5-19).
Tips
If the image quality with higher accuracy is required, you can use the adjustment method with [Gamma Automatic Adj.],
[Maximum Density Adjustment], or [Color Density Manual Control] added. For details, refer to the HTML User's Guide.
Color Density Control
Using the Color Density Control function, you can specify this machine to automatically carry out calibration at
periodical intervals.
Calibration is executed every arbitrarily specified number of sheets, and you can keep printing using the appropriate
density.
Tips
The printed chart is included in the print count.
)
Auto setting of Color Density Control
A
Press [Adjustment] on the [MACHINE]
screen.
B
Press [Color Density Control].