Konica Minolta IC-308 - Manual (Page 103)

7-15
bizhub PRESS C1100/C1085
7
) Post Inserter PI-502
To use Post Inserter PI-502, mount it in Finisher FS-532. You can load paper into the upper and lower trays of Post
Inserter PI-502 and feed paper to an output-related optional device. On the control panel of Post Inserter PI-502,
you can configure the punch, staple, or fold function for paper to be fed from the lower tray. For details, refer to the
HTML User's Guide.
Paper tray
1: Upper tray
2: Lower tray
1
2
Specifications
Paper weight 50 g/m
2
to 300 g/m
2
/ 13 lb Bond to 81 lb Bond
Paper size Upper tray
•
A4 w/v, B5 w/v, A5 v,
8.5 e 11 w/v, 7.25 e 10.5 w, 5.5 e 8.5 v, 16K w/v
• Custom: Width 182 mm to 330 mm, Length 139 mm to 297 mm / Width 7.17"
to 12.99", Length 5.47" to 11.69"
Lower tray
•
A3 w, B4 w, SRA4 w, A4 w/v, B5 w/v, A5 v,
12 e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w/v, 7.25 e 10.5 w/v, 5.5 e 8.5 v,
8K w, 16K w/v, Foolscap*
• Custom: Width 182 mm to 330 mm, Length 139 mm to 482 mm / Width 7.17"
to 12.99", Length 5.47" to 18.98"
*Foolscap refers to 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, or 8 e 13 w.
Storage capacity 200 sheets (80 g/m 2 / 21 lb Bond) or within 30 mm / 1.18" thick for the upper tray
and lower tray each