Konica Minolta bizhub C252P - Manual (Page 87)

3 User Operations
3-2 C252P
Use
r Op
er
at
ions
Chapter 3
3 User Operations
3.1 Secure Print Function
The Secure Print function allows a Secure Print specified by a corresponding
password from the PC to be used in the condition registered in the machine.
To access a Secure Print file, authentication is performed through an 8-digit
password that verifies an authenticated user of the Secure Print file. The
password entered is displayed as “*.” When the EnhancedSecurity mode is
set to “ON,” the number of times in which authentication fails is counted.
2
Note
Enter the Secure Print ID and password through the printer driver on the
PC side. The password entered is displayed as “*.”
The Secure Print password must be the one consisting of 8 digits and
meeting the Password Rules requirements. Any Secure Print, the pass-
word for which does not meet the Password Rules requirements, will not
be registered in the machine. For details of Password Rules, see “Pass-
word Rules” on page 1-11.
3.1.1 Accessing the Secure Print
2
Note
For the Secure Print ID, enter the one that has been set on the printer
driver side.
If a wrong Secure Print ID is entered, the target Secure Print Document
will not be displayed. Enter the correct Secure Print ID.
For the Secure Print Password, enter the 8-digit one set on the printer
driver side.
The machine rejects any Secure Print Password that consists of less than
8 digits.
If no Secure Print Document corresponding to the Secure Print ID en-
tered is found, the Secure Print ID cannot be identified.
c252P_security_E.book 2 ページ ２００７年４月１０日 火曜日 午後７時４６分