Konica Minolta bizhub C252P - Manual (Page 54)

Administrator Operations 2
C252P 2-37
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
2.7.3 Setting the Encryption Key (encryption word)
2
Note
When the main power switch is turned off, then on again, wait at least 10
seconds to turn it on after turning it off. if there is no wait period between
turning the main power switch off, then on again, the machine may not
function properly.
Do not leave the machine with the Admin. Setting mode setting screen
left shown on the display. If it is absolutely necessary to leave the ma-
chine, be sure first to log off from the Admin. Setting mode.
0 For the procedure to call the HDD Setting screen to the display, see steps
1 through 4 of “Setting the HDD Password” on page 2-30.
1
Call the HDD Setting to the screen from the control panel.
2
Press the [ ) ] key.
3
Press the [,] key to display “Encryption Key.”
4
Press the [Menu/Select] key.
c252P_security_E.book 37 ページ ２００７年４月１０日 火曜日 午後７時４６分