5 making priority setting, Setting can be made only from the control panel – Konica Minolta bizhub C252P User Manual
Page 62
Administrator Operations
2
C252P
2-45
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
2.7.5
Making Priority Setting
2
Note
When the main power switch is turned off, then on again, wait at least 10
seconds to turn it on after turning it off. if there is no wait period between
turning the main power switch off, then on again, the machine may not
function properly.
Do not leave the machine with the Admin. Setting mode setting screen
left shown on the display. If it is absolutely necessary to leave the ma-
chine, be sure first to log off from the Admin. Setting mode.
0
For the procedure to call the HDD Setting screen to the display, see steps
1 through 4 of “Setting the HDD Password” on page 2-30.
1
Call the HDD Setting to the screen from the control panel.
2
Press the [
)
] key.
3
Press the [,] key to display “Priority Setting.”
4
Press the [Menu/Select] key.
5
Press the [+] or [,] key to select “Encryption” or “Overwrite.”
6
Press the [Menu/Select] key.
c252P_security_E.book 45 ページ ２００７年４月１０日 火曜日 午後７時４６分