Konica Minolta SL1000 - Manual (Page 53)

Chapter 3 SL-Touch for SL1000
3-27
4. Contrast The contrast of the image is adjusted.
High The contrast of the image is increased.
Low The contrast of the image is decreased.
NOTE !  The proper image density can be obtained by adjusting
"Brightness" and "Contrast" to distribute the histogram in the
whole area.
5. Sharpness The sharpness of the image is adjusted.
Sharp The image is made sharper.
Soft The image is made softer.
NOTE ! Even if "Brightness" and "Contrast" are adjusted according to the film, an
appropriate image density might not be obtained. In that case, it might be
improved by changing illuminance intensity of the LED lamp. (Please refer to the
section "3.4 Lamp Illuminance".)