Konica Minolta SL1000 - Manual (Page 28)

SL1000 User’s Guide
3-2
1 SL-Touch for SL1000 Setup
It is necessary to install 'SL-Touch for SL1000' in the Personal Computer beforehand to display the
image and to take it with a Personal Computer connected with SL1000. This chapter describes the
system requirements of the Personal Computer and the installation procedure of 'SL-Touch for
SL1000'.
1.1 Trademark Acknowledgments
IBM and IBM PC/AT are registered trademarks of International Business Machines
Corporation.
Microsoft, Windows, Windows Vista, Windows 7 and Windows 8 are registered trademarks of
Microsoft Corporation.
All other brand or product names are trademarks or registered trademarks of their respective
companies or organizations
1.2 System environment
The following are the minimum system requirements for the computer connected to the Scanner
to install the Driver. The operator should be completely familiar with basic Windows operations.
Computer Compatible with IBM PC/AT
OS Windows 8: 32 bit, 64 bit
Windows 7: 32 bit, 64 bit
Windows Vista: 32 bit, 64 bit SP2 or later
CPU INTEL Core i7 or greater
Memory 4 GB or greater
Hard disk drive 2 GB of available hard-disk space
Interface Hi-Speed USB 2.0
Optical disc drive CD-ROM drive
Display Display that has screen resolution of 1,280 x 1,024 or greater
Recommended System Requirements
CPU INTEL Core i7 2.93 GHz or faster
Memory 4 GB or greater
Hard disk drive SATA 3 7200 rpm or greater
Video Card GeForce GT430 1 GB or greater
Display Display that has a screen resolution of 1,920 x 1,080
Touch Panel Multi-touch monitor or display equipped with a Touch Panel
NOTE ! To use the zoom function with a multi touch panel, the display must be supported
by the multi-touch function of Windows 7 or Windows 8.