Konica Minolta SL1000 - Manual (Page 43)

Chapter 3 SL-Touch for SL1000
3-17
3.1 Toolbar
to VIEW Mode It changes from the SCAN Mode to the VIEW Mode.
Film Selection The Film Selection screen is displayed.
 3.2
Film Selection
Auto Focus
It is automatically adjusted to the best focus.
NOTE !  It may not function correctly due to the
condition of the film (density, contrast, and
image pattern). In this case, adjust it manually.
Film Polarity
The polarity of the film ("Positive film" or "Negative film")
is selected.
Zoom In
The Scanner performs the zoom operation so that the
magnification display is adjusted as long as button is
depressed.
The Scanner shifts to an electronic zoom when the upper
bound of the optical zoom is exceeded and does the
magnification operation.
Zoom Out
The Scanner does the zoom operation like wide-ranging
being displayed as long as button is depressed.
Rotate CCW
Whenever the button is pushed, the image is rotated 90
degrees counterclockwise.
Rotate CW
Whenever the button is pushed, the image is rotated 90
degrees clockwise.
Horizontal Flip
Whenever the button is pushed, the image reverses right and
left.
NOTE !  It changes into the picture that reverses the
icon for the reverse image.