Konica Minolta SL1000 - Manual (Page 45)

Chapter 3 SL-Touch for SL1000
3-19
Magnifier +
The displayed image is continuously magnified. The
magnification amount is displayed in the scan window (upper
right) while zooming.
Magnifier -
The image that has been magnified is reduced.
NOTE !  When an image is magnified, the Cropping
Area cannot be changed.
 The reduction image doesn't become smaller
than the scan window size.
 It is possible to magnify and to reduce even
by the zoom operation of the Touch Panel for
the multi touch environment.
Fit to Window
The zoom image is returned to normal size.
Image Adjustment
The image quality is adjusted
 3.3
Image Adjustment
Auto Cropping
The Cropping Area is automatically adjusted to the size of the
image frame.
NOTE !  The Auto Cropping might not function
normally according to the shape and the
density of the image. In this case, it adjusts
manually.
Cropping Mode
The Cropping Mode ("Normal Mode" or "Custom Mode") is
changed.
Normal Mode : The selected area (Cropping Area) is read in an area one
rectangular.
Custom Mode : The rectangular area is added to plurals, and the area is read.
"Custom Mode" is selected, a mouse cursor becomes a
"cross" and it can specify two or more ranges.
NOTE !  It returns to the Cropping Area at the Normal
Mode immediately before when changing
from the Custom Mode to the Normal Mode.
 When the "Custom Mode" has been
selected, the setting of "Edit" (Masking etc.)
becomes invalid.
Auto Zoom
To be suitable for the scan window size, the range of the
Cropping Area selection is automatic zoom position
corrected.
NOTE !  The magnification becomes the upper bound
of the optical zoom.