Konica Minolta SL1000 - Manual (Page 118)

SL1000 User’s Guide
5-4
Information or Warning message Action
SL-Touch
Save In refers to location that is
unavailable.
・ It is due to the non-detection of USB Memory or
the shortage of the memory capacity in the
preservation place.
・ Please change the preservation setting to the large
capacity place or insert the USB Memory etc.
・ There is a possibility that the file is not normally
preserved before displaying when this message is
displayed.
2.3 Errors shown on the Personal Computer Screen
Error message Action
SL-Touch Error
Cannot find the Scanner.
Connect the Scanner to the PC, install the
driver, then boot up the software.
・ Start the application after connecting the Scanner
with the Personal Computer, and installing the
driver.
SL-Touch Error
Turn OFF the power switch of the Scanner,
and turn it ON again.
Restart the Personal Computer.
• After confirming that the USB Cable is properly
connected, turn ON the Power Switch of the
Scanner again and restart the computer.
SL-Touch Error
CCD Board Error.
Turn OFF the power switch of the Scanner,
and turn it ON again.
Restart the Personal Computer.
• After confirming that the USB Cable is properly
connected, turn ON the Power Switch of the
Scanner again and restart the computer.
SL-Touch Error
Zoom Motor Error.
Turn OFF the power switch of the Scanner,
and turn it ON again.
Restart the Personal Computer.
• After confirming that the USB Cable is properly
connected, turn ON the Power Switch of the
Scanner again and restart the computer.
SL-Touch Error
Focus Motor Error.
Turn OFF the power switch of the Scanner,
and turn it ON again.
Restart the Personal Computer.
• After confirming that the USB Cable is properly
connected, turn ON the Power Switch of the
Scanner again and restart the computer.