Konica Minolta SL1000 - Manual (Page 50)

SL1000 User’s Guide
3-24
6. Film Color The color of the film used is selected.
Monochrome Film: The film is selected when the monochrome display
and scanning.
Color Film: The film is selected when the color display and
scanning.
7. Horizontal Flip Images are flipped to the right and left..
NOTE !  When the Roll Film is selected, the initial value of
"Horizontal Flip" is “ON”
8. Rotate The image rotation is selected.
You can select four rotation values (None, CW90°, CCW180° and
CCW90°).
9. OK It moves to the zoom position and the color display to set of the selection.
NOTE !  The following settings change into an initial value or the
registration value of each custom profile if the film
selection is executed.
 Film Type
 Film Color (Monochrome and Color Film)
 Film Polarity (Positive and Negative Film)
 Zoom Position
 Horizontal Flip (ON and OFF)
 Rotate (None, CW 90°, CCW180° and CCW 90°)
 Image Adjustment
 Cropping Mode
10. Cancel It cancels the moving of the setting of the color display or the zoom
position.
NOTE !  When the application starts, the color display and the
zoom position are moved to set of the memory at the end.