Konica Minolta bizhub PRO C1060L - Manual (Page 88)

6-1
6.1 Replenish and Replace Consumables
6
Troubleshooting
6.1 Replenish and Replace Consumables
) Replacing a toner bottle
WARNING WARNING
WARNING
Do not throw the toner bottle or toner into an open flame. The hot toner may scatter and cause burns or
other damage.
CAUTION
CAUTION
- Do not leave toner-related parts (toner bottles or PC drum units) within easy reach of children.
Licking any of these parts or ingesting toner could damage your health.
- Do not store toner-related parts (developing units) near devices susceptible to magnetism, such as
precision equipment and data storage devices, otherwise they may malfunction.
- Do not force open the toner-related parts (toner bottles). If toner tumbles from the toner bottle, take
utmost care to avoid inhaling it or even getting skin contact.
- If toner lands on your skin or clothing, wash thoroughly with soap and water.
- If you get toner into your eyes, immediately rinse them with running water for over 15 minutes. Seek
medical advice if irritation persists.
- If you inhale toner, move to a place with fresh air and gargle with a lot of water repeatedly. Should
you get symptoms such as coughing, seek medical advice.
- If you swallow toner, rinse out your mouth and drink a few glasses of water. Seek medical advice if
necessary.
When toner in a toner bottle runs out, the message [Ready to print / Please add toner] is displayed on the [MACHINE]
screen, and the color of the exhausted toner is displayed in red on the [Consumable and Scrap Indicators] display.
Tips
This machine contains a toner storage container that contains spare toner to prevent a print job from being interrupted
during printing even if toner in the toner bottle becomes exhausted.
When toner supply from the toner storage also becomes low, the message [No toner / Please add toner] is displayed.
Follow the procedure below to replace a toner bottle.