Konica Minolta bizhub PRO C1060L - Manual (Page 104)

7-2
7.2 Name of each Component
7.2 Name of each Component
External components
8 7
9
6
5
10
4
2 1
3
No. Name Description
1 ADF (Option) Scans data while automatically feeding an original page by
page. This device automatically inverts a double-sided original
to scan data.
This device cannot be installed on the Printer Model.
2 Sub power switch Turns the sub power of the machine on or off.
3 Port (type A) (USB 2.0/1.1 compati-
ble) Used to connect devices such as backup HDD, keyboard, and
mouse.
This port is available for low-power devices only. Provide an ex-
ternal supply of power for devices that require a large amount of
power.
4 Touch panel Displays a screen such as the [MACHINE] screen to enable you
to carry out machine operations and settings. Also, operation or
troubleshooting procedures can be provided.
5 Control panel Performs operations or configures settings.
6 Toner access door Open when adding toner.
7 Right side door Open when handling a paper jam.
8 Tray 1/2 Up to 500 sheets (80 g/m 2 / 21 lb) can be loaded into Tray 1, and
up to 1,000 sheets (80 g/m 2 / 21 lb) into Tray 2.
9 Waste toner box door Open when replacing a waste toner box.
10 Front door Open when removing jammed paper or turning the main power
switch on or off.