Konica Minolta bizhub PRO C1060L - Manual (Page 83)

5-33
bizhub PRO C1060L
5
bizhub PRESS C1070/C1070P/C1060
R
When the message is displayed, click
[OK].
S
Check the calibration data
measurement result using the graph
displayed in the [Density Output] area.
To change and check the contents of the graph
displayed in the [Density Output] area, adjust
the check boxes on the right-hand side.
T
To execute calibration several times, repeat procedures 5 to 18.
U
Click [Close] to exit calibration.
Tips
To view the previous calibration setting, select [Check the Status].