Konica Minolta bizhub PRO C1060L - Manual (Page 3)

x-i
bizhub PRO C1060L
bizhub PRESS C1070/C1070P/C1060
Intended use of this machine
Intended use
This machine is designed to be used as a digital printing system for the following purposes:
- Print, copy and scan documents.
- Use available finishing functions such as duplexing, stapling, hole-punching, multi-folding and booklet creation
if appropriate options are installed.
- Store documents to reprint on the HDD of this machine.
The intended use also requires that:
- The system is used within the limits of device specifications and specifications of optional components,
- All safety instructions in the related user's guides are observed,
- Legal restrictions on copying or printing (refer to instruction booklet "Safety Information") are observed,
- Inspection and maintenance instructions are adhered to,
- General, national and company safety provisions are observed.
Impermissible operating conditions
The system may not be operated if:
- Errors or damage have been discovered,
- Maintenance intervals have been exceeded,
- Mechanical or electrical functions do not work as they should.
Exclusion of liability
The manufacturer of the system assumes no liability for damages if the system was operated under impermissible
conditions.
Target groups
The user's guides are intended for the following users of the system;
- Operator: Person who has been trained by Konica Minolta or authorized partner to operate the system for its
intended use as well as manage consumables, and perform the maintenance and troubleshooting described in
user's guides.
- Administrator: Person who has been trained by Konica Minolta or authorized partner to manage consumables,
adjust system settings, and establish network connections and security systems.
Everyone who uses this system must have read and understood the related user's guides.