Konica Minolta magicolor 7450 II - Manual (Page 293)

Configuring the Printer 273
Tray Mapping Tray Mapping
Mode If On is selected, Tray Mapping Mode is
enabled. Paper feed from physical tray
allocated in each logical tray.
If Off is selected, Tray Mapping Mode is
disabled.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
PAPER MENU - PAPER
SOURCE - TRAY MAPPING
- TRAY MAPPING MODE
Logical Tray
0–9 Specifies which physical tray is allocated
in the logical tray.
Choices: Physical Tray 1, Physical Tray 2,
Physical Tray 3, Physical Tray 4,
Physical Tray 5
Default: Physical Tray 1 (Logical Tray 1)
Physical Tray 2 (other)
Configuration Menu Equivalent:
PAPER MENU - PAPER
SOURCE - TRAY MAPPING
- LOGICAL TRAY 0-9
"
Physical Tray 3, Physical Tray 4
and Physical Tray 5 appear only if
an optional lower feeder unit is
installed.
Apply button Applies the configuration settings for this
window.
Clear button Resets all configuration settings to previ-
ous values.
Item Description