Konica Minolta magicolor 7450 II - Manual (Page 174)

Specifying Printer Driver Settings 154
Image Options
Options Installed
Parameters Settings
Image Halftone Specifies the halftone for graphics as Line
Art, Detail, or Smooth.
„ The default setting is Detail.
Image RGB Gray Treat-
ment Specifies the RGB Gray Treatment as Com-
posite Black, Black and Gray, or Black
Only.
„ The default setting is Composite Black.
Image RGB Intent Specifies RGB intent for graphics as Vivid,
Photographic, Relative Color, or Absolute
Color.
„ The default setting is Photographic.
Image RGB Source Specifies RGB source for graphics as None,
sRGB, Adobe RGB (1998), Apple RGB,
ColorMatch RGB, or Blue Adjust RGB.
„ The default setting is sRGB.
Parameters Settings
Duplex Unit Select Enable if the optional duplexing unit
for the printer has been installed.
„ The default setting is Disable.
Hard Disk Select Enable if the optional Hard Disk for
the printer has been installed.
„ The default setting is Disable.
Paper Source Unit Select Unit 3, Unit 3 + Unit 4, or Unit 3 +
Unit 4 + Unit 5 if the optional trays for the
printer have been installed.
„ The default setting is Disable.
Printer Memory Select 256 MB, 512 MB, 768 MB, or
1024 MB if the optional memory for the
printer has been installed.
„ The default setting is 256 MB.