Konica Minolta magicolor 7450 II User Manual
Page 187
Printing With NetWare
167
7
In Administrator mode of PageScope Web Connection, select Net Ware
from the Network tab, and then specify the following settings.
–
Netware Print: Select Enable.
–
Frame Type:
Select Auto. (Select the frame type according to the network envi-
ronment.)
–
Mode: Select NPrinter/RPrinter.
–
Printer Name:
Specify the printer name. (Default: MC7450-XXXXXX)
–
Printer Number:
Specify the printer number (0-255). When 255 is specified, the set-
ting is Auto.
8
Restart the printer (turn the printer off, then on again).
9
Use the NetWare server console to display the print server screen, and
then check that the created printer is shown as Waiting for Job for the
connected printer (0).
This manual is related to the following products: