Konica Minolta magicolor 7450 II - Manual (Page 206)

Network Connection 186
3
When the printer’s message window displays READY , print a configura-
tion page to verify that the IP address is set.
"
If the configuration page was printed immediately after the mes-
sage READY appeared, the updated IP address information may
not be applied.
4
Install the printer driver and utilities.
"
If the printer cannot be connected to a DHCP server, an IP
address within the range between 169.254.0.0 and
169.254.255.255 is automatically set.
"
If the IP address is not automatically assigned correctly, refer to
“Setting the Address Manually” on page 187 to set the IP address
of the printer to “0.0.0.0”, and then perform the operation
described above again.
Press this
key . . . (until) the message window displays . . .
READY
PROOF/PRINT MENU
or if no optional hard disk kit is installed:
PRINT MENU
PRINT MENU
CONFIGURATION PG
PRINT