Konica Minolta magicolor 7450 II - Manual (Page 201)

Ethernet Menu 181
DEFAULT GATEWAY
DHCP/BOOTP
TELNET
Purpose Sets the address of the router/gateway if a router/gateway
is used on your network and you allow users outside your
network environment to print on your printer.
Range 0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
Default 000.000.000.000
Purpose If there is a DHCP or BOOTP server on the network, speci-
fies whether the IP address and other network information
is automatically assigned by the DHCP or BOOTP server.
Options ON
OFF
Default ON
Purpose Select whether to enable or disable Telnet transmissions.
When ENABLE is selected, Telnet transmissions are
enabled.
When DISABLE is selected, Telnet transmissions are dis-
abled.
Options ENABLE
DISABLE
Default ENABLE