Airlink101 AR580W3G User Manual

Page 94

Reset (12):

Unselect all mappings.

After you finish with all settings, please click ‘Apply’ (13) button and the following

message will be displayed on your web browser:

Please click ‘Continue’ to back to previous setup menu; to continue on other setup

procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please

wait for about 30 seconds while router is rebooting).

If you want to reset all settings in this page back to previously-saved value, please click

‘Cancel’ button.

3-2-3 Virtual Server

This function allows you to redirect a port on Internet IP address (on WAN port) to a

specified port of an IP address on local network, so you can setup an Internet service on

the computer on local network, without exposing it on Internet directly. You can also build

many sets of port redirection, to provide many different Internet services on different local

computers via a single Internet IP address.

Please click ‘NAT’ menu on the left of web management interface, then click ‘Virtual

Server’, and the following message will be displayed on your web browser: