Airlink101 AR580W3G User Manual

Page 71

wireless client supports manual channel number select, and this

would help in certain scenario when there is some radio

communication problem.

Associated Clients (4): Click ‘Show Active Clients’ button, then an “Active Wireless Client

Table” will pop up. You can see the status of all active wireless

stations that are connecting to the access point.

After you finish the wireless setting, please click ‘Apply’ button, after you click ‘Apply’, the

following message will be displayed on your web browser:

Please click ‘Continue’ to back to previous setup menu; to continue on router setup, or

click ‘Apply’ to reboot the router so the settings will take effect (Please wait for about 30

seconds while router is rebooting).

NOTE: If you don’t have special reason to limit the type of allowed wireless

client, it’s recommended to choose ‘2.4 GHz (B+G+N) to maximize wireless

client compatibility.

TIPS: You can try to change channel number to another one if you think the

data transfer rate is too slow. There could be some other wireless routers

using the same channel, which will disturb the radio communication

between wireless client and the wireless router.