Airlink101 AR580W3G User Manual

Page 34

previous menu, click ‘Back’.

2-4-5 Setup procedure for ‘PPTP xDSL’:

PPTP xDSL requires two kinds of setting: WAN interface setting (setup IP address) and

PPTP setting (PPTP user name and password). Here we start from WAN interface

setting:

Select the type of how you obtain IP address from your service provider here. You can

choose ‘Obtain an IP address automatically’ (equal to DHCP, please refer to ‘Cable

Modem’ section above), or ‘Use the following IP address’ (i.e. static IP address).

MTU - Please use default value if you don’t know what it is, or ask your

service provider for a proper value.

Connection Type - There are 3 options: ‘Continuous’ - keep internet

connection alive, do not disconnect, connect on Demand - only connects to

Internet when there’s a connect attempt, and ‘Manual’ - only connects to

Internet when ‘Connect’ button on this page is pressed, and disconnects

when ‘Disconnect button is pressed.

Idle Time Out: Specify the time to shutdown internet connect after no

internet activity is detected by minute. This option is only available when

connection type is ‘Connect on Demand’.