Airlink101 AR580W3G - Manual (Page 53)

43
2-6-5 Setup procedure for ‘PPTP’:
PPTP requires two kinds of setting: WAN interface setting (setup IP address) and PPTP
setting (PPTP user name and password). Here we start from WAN interface setting:
Select the type of how you obtain IP address from your service provider here. You can
choose ‘Obtain an IP address Automatically’ (equal to DHCP, please refer to ‘Cable
Modem’ section above), or ‘Use The Following IP Address’ (i.e. static IP address)
WAN interface settings must be correctly set, or the Internet connection will fail even
those settings of PPTP settings are correct. Please contact your Internet service provider
if you don’t know what you should fill in these fields.
Now please go to PPTP settings section:
1
2
3
4
5
7
8
9
6