Airlink101 AR580W3G - Manual (Page 82)

72
it blank, however, it’s recommended to use this field
to write a comment for every MAC addresses as a
memory aid.
Add (7): Click ‘Add’ button to add the MAC address and associated
comment to the MAC address filtering table.
Clear (8): Click ‘Clear’ to remove the value you inputted in MAC address
and comment field.
After you finish with all settings, please click ‘Apply’ (9) button and the following message
will be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please
wait for about 30 seconds while router is rebooting).
If you want to reset all settings in this page back to previously-saved value, please click
‘Cancel’ button.
2-8-5 Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless
network clients and this wireless router. You don’t have to select encryption mode and
input a long encryption passphrase every time when you need to setup a wireless client,
you only have to press a button on wireless client and this wireless router, and the WPS
will do the rest for you.