Airlink101 AR580W3G - Manual (Page 115)

105
Current All existing public IP address and private IP
DMZ table (7): address mapping will be displayed here.
Delete (8): If you want to delete a specific DMZ entry, check
the ‘select’ box of the DMZ entry you want to delete, then click
‘Delete Selected’ button. (You can select more than one DMZ
entries).
Delete All (9): If you want to delete all DMZ entries listed here, please click
‘Delete All’ button.
Reset (10): You can also click ‘Reset’ button to unselect all DMZ entries.
After you finish with all settings, please click ‘Apply’ (11) button and the following
message will be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please
wait for about 30 seconds while router is rebooting).
If you want to reset all settings in this page back to previously-saved value, please click
‘Cancel’ button.