Alliance Laundry Systems UW60P3 - Manual (Page 19)

Operation
17 F232090 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operational Keypad
The computer’s control keypad includes sixteen keys.
See Figure 5. Fourteen of these keys list functions
printed in black lettering on a silver background.
These functions are available to the operator and are
intended to control operation of the machine. See the
table below.
Operational Keypad
Key Description
Numbers 0–9 Press to select cycle number.
Display Temp Press and hold. Display will show and update sump temperature in degrees Fahrenheit or Centigrade.
Advance
Press to cause computer to skip to the next step in the cycle. The computer will not advance past
drain step if machine is not empty. (The Advance key is enabled at the factory and can be disabled at
the
laundry site.)
Stop Press to immediately abort the cycle and initiate the Stop Routine.
Start
Press to start selected cycle or to re-start a step following a “FILL” or “EMTY” alarm. See Error
Recovery Routine in this section of the manual.
Manual See Manual Mode Control Feature at the end of this section.