Alliance Laundry Systems UW60P3 - Manual (Page 18)

Operation
F232090 16 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
WO Warm fill to overflow level
WR Warm rinse
• Left dot–poor balance condition
• Second dot from left–door lock switch
• Third dot from left–program mode
• Fourth dot from left–high level reached
•
Fifth dot from left–medium level
reached
• Right dot–low level reached
EXISTS Cycle already in memory
EDIT? Do you want to edit the cycle?
TEMP Over-temperature-limit condition
OVERHT
Open or shorted temperature input
circuit or temperature out of
computer’s allowable limits
WATER
Water in washer-extractor at end of
cycle
°FAR Temperature in degrees Fahrenheit
°CEN Temperature in degrees Centigrade
MANUAL Manual Mode enabled
NO MAN Manual Mode disabled
1DRAIN One drain capability selected
2Drain
Second independent drain enabled via
Auxiliary 2 output. (This feature is
operational on UWPV models only.
and should not be confused with the
“dual drain” option.)
ADV Advance (skip steps) feature enabled
NO ADV Advance feature disabled
Display Interpretations (Continued)