Lenovo ThinkCentre M57e - Manual (Page 15)

customers to install options or replace CRUs. You must closely follow all
instructions when installing or replacing parts. The Off state of a power
indicator does not necessarily mean that voltage levels inside a product are
zero. Before you remove the covers from a product equipped with a power
cord, always make sure that the power is turned off and that the product is
unplugged from any power source. For more information on CRUs, refer to the
ThinkCentre Hardware Installation and Replacement Guide for this product. If you
have any questions or concerns, contact the Customer Support Center.
Although there are no moving parts in your computer after the power cord has
been disconnected, the following warnings are required for your safety.
DANGER
Hazardous moving parts. Keep fingers and other body parts away.
CAUTION:
Before replacing any CRUs, turn off the computer and wait three to five
minutes to let the computer cool before opening the cover.
Static electricity prevention
Static electricity, although harmless to you, can seriously damage computer
components and options. Improper handling of static-sensitive parts can cause
damage to the part. When you unpack an option or CRU, do not open the
static-protective package containing the part until the instructions direct you to
install it.
When you handle options or CRUs, or perform any work inside the computer,
take the following precautions to avoid static-electricity damage:
v Limit your movement. Movement can cause static electricity to build up
around you.
v Always handle components carefully. Handle adapters, memory modules,
and other circuit boards by the edges. Never touch exposed circuitry.
v Prevent others from touching components.
Chapter 1. Important safety information
11