Avaya B149 - Manual (Page 23)

19
Avaya B149 Conference Phone User Guide
ADJUSTING RING LEVEL VoLUME
 Select MENU > SETTINGS > RING LEVEL.
 Select your choice and press oK to confirm.
 There are six volume levels plus a silent mode. You will hear the ring tone for each
level you select. If you select silent mode, an LED on the phone flashes when an
incoming call is received.
ADJUSTING THE fLASH/R PULSE DURATIoN
The Flash/R pulse (Register recall) is used to request a new line from the PBX. Different
countries may require different durations for activating the Flash/R pulse.
 Select MENU > SETTINGS > fLASH.
 Select your choice and press oK to confirm.
Examples of suitable settings are:
100 ms – Scandinavia, Europe, Siemens HiPath
300 ms – Germany, France, Israel
500 ms – USA
SELECTING CALLER ID STANDARD
Avaya B149 needs to be configured to match the Caller ID standard in your country.
Note that in some cases even individual states/provinces within a country use different
standards. The table below is a guideline for choosing the correct setting. If the caller
ID is not working properly, select another setting or contact your telephone service
provider for further information.
Caller ID standard Country
Bellcore (Telcordia) Canada (usually), USA, Australia, New Zealand,
China
, Hong Kong, Singapore
ETSI Austria, Belgium, Czech Republic, France, Germany, Italy,
Luxemburg, Norway, Poland, Spain, Slovenia, Switzerland,
Turkey, South Africa, Taiwan
BT (British Telecom) United Kingdom
DTMF
Denmark, Finland, Greece, Iceland, Netherlands, Portugal,
Sweden, China, India, Saudi Arabia, Brazil, Uruguay
 Select MENU > SETTINGS > CALLER ID.
 Select your choice and press oK to confirm.
SETTINGS