Avaya B149 - Manual (Page 16)

12
Avaya B149 Conference Phone User Guide
DELETING CoNfERENCE GRoUPS
 Select MENU > CoNf GUIDE > ERASE GRoUP.
 Mark the group you want to delete and press oK.
 Confirm that you really want to delete the group by pressing oK or cancel the dele-
tion of a group by pressing C.
DELETE ALL CoNfERENCE GRoUPS
 Select MENU > CoNf GUIDE > ERASE ALL.
 Confirm that you really want to delete all groups by pressing oK or cancel the dele-
tion of all groups by pressing C.
CoNfERENCE GUIDE SETTINGS
When a multi-party call is going to be connected, a special signal (flash or R-pulse) is
produced which transmits the command (request, return and conference) to the PBX. It
may be necessary to change the type of signal if calls are connected via a PBX.
 Select MENU > CoNf GUIDE > SETTINGS.
 Enter the command for a request for a new dialling tone and press oK to confirm.
(“F” is the default setting)
 Enter the command to connect everyone to a multi-party call and press oK to
confirm. (“F3” is the default setting)
 Enter the command to return to your original call and press oK to confirm. (“F” is
the default setting)
If you experience problems making multi-party calls
It may be necessary to change the duration of the R-pulse so that it works with your
PBX. Read “ADJUSTING THE FLASH/R PULSE DURATION” on page 19.
Your PBX may not be programmed to admit multi-party calls or the procedure may be
different. Please contact your telephone administrator or service provider.
DISPLAYING CoNfERENCE GUIDE STATUS
 Select MENU > CoNf GUIDE > STATUS.
The display screen indicates the number of conference groups already stored plus how many
more groups can be added.
CoNfERENCE GUIDE