Cru identification – Lenovo ThinkServer Storage SA120 User Manual
Page 26

CRU identification
Customer Replaceable Units (CRUs) are parts that can be upgraded or replaced by the customer. If a CRU is
determined to be defective during the warranty period, a replacement CRU will be provided to the customer.
Customers are responsible for installing the self-service CRUs for this product. Customers also can install
optional-service CRUs, which might require some technical skills or tools, or request that a technician install
the optional-service CRU under the terms of the applicable warranty service type for your country or region.
Non-CRUs must be replaced only by trained service technicians.
The following table lists the major Field Replacement Units (FRUs) in your storage array and the CRU
identification information. For a complete listing of FRU information, such as FRU part numbers and
supported storage array models, go to:
http:/www.lenovo.com/serviceparts-lookup
Notes:
• Before servicing a Lenovo product, ensure that you read and understand “Safety information” on page iii.
• Use only parts provided by Lenovo.
Description
Self-service CRU
Optional-service CRU
Dummy drive tray (in some models)
Yes
No
Power supply shield (in some models)
Yes
No
Fan assembly
Yes
No
Hard disk drive or solid-state drive (in some models)
Yes
No
Drive tray
Yes
No
Backplane
No
No
Power supply
Yes
No
Rear I/O module
Yes
No
2.5-inch drive cage (SATA-to-SAS) (available as an
option)
Yes
No
Mini SAS cables
Yes
No
14
ThinkServer Storage SA120 User Guide and Hardware Maintenance Manual