Vollrath M202B Water Cooled - Manual (Page 24)

Owner’s Manual #513666 Rev.1 18 M202B Model Machines
Error Code 5 - Freezing Cylinder Sensor
The Freezing Cylinder Sensor Error (E5) indicates
a failure of the freezing cylinder sensor or if the
sensor is out of range. If the control panel displays
an E5, place the Freezing Cylinder Off/On switch
in the OFF position and back in the ON position.
If the error persists, contact your Authorized
Stoelting Distributor for further assistance.
NOTE
When the machine encounters a Freezing Cylinder
Sensor Error, it will continue to run using preset
timers. This mode will allow the freezing cylinder
to continue making product until it can be serviced.
Error Code 6 - Hopper Sensor
The Hopper Sensor Error (E6) will not occur on
an M202 machine.
Error Code 7 - Drive Motor
If the control panel displays a Drive Motor Error
(E7), the control does not sense current coming
from the drive motor. Place the Freezing Cylinder
Off/On switch in the OFF position and back in
the ON position. If the error persists, contact
your Authorized Stoelting Distributor for further
assistance.
Error Code 8 - Cab Sensor
A Cab Sensor Error (E8) will not occur on an
M202 machine.
Error Code 9 - High Pressure Cutout
High Pressure Cutout Errors (E9) are usually
caused by a dirty or ineffi cient condenser. If the
control panel displays an E9 on an air cooled
machine, check for proper air clearance around
the condenser. In a water cooled machine, check
that the water is not shut off. If the error persists,
contact your Authorized Stoelting Distributor for
further assistance.
Error Code 10 - Auxiliary Sensor
An Auxiliary Temperature Sensor Error (E10)
occurs if the temperature sensor on the control
board fails. Place the Freezing Cylinder Off/
On switch in the OFF position and back in the
ON position. If the error persists, contact your
Authorized Stoelting Distributor for further
assistance.
Error Code 12 - Right Hopper Sensor
The Right Hopper Sensor Error (E12) indicates a
hopper temperature sensor failure. This error will
also appear if the sensor is out of range. If the
control panel displays an E12, place the Freezing
Cylinder Off-On switch in the Off position and back
in the On position. If the error persists, contact
your Authorized Stoelting Distributor for further
assistance.
Error Code 13 - Left Hopper Sensor
The Left Hopper Sensor Error (E13) indicates a
hopper temperature sensor failure. This error will
also appear if the sensor is out of range. If the
control panel displays an E13, place the Freezing
Cylinder Off-On switch in the Off position and back
in the On position. If the error persists, contact
your Authorized Stoelting Distributor for further
assistance.
ALTERNATING FLASHING CONTROL PANEL LIGHTS
The display panel lights will fl ash in an alternating
sequence under any error codes. Clear the error
and place the Freezing Cylinder Off/On switch in
the OFF position and back in the ON position.