Norgren Filter/Regulators - Manual (Page 14)

See Section ALE-24 for Accessories
ALE-12-14 Littleton, CO USA Phone 303-794-2611 www.norgren.com
B39
● Compact design
● High efficiency oil and particle removal
● Low torque, non-rising adjusting knob
● Snap action knob locks pressure setting when
pushed in
● Standard relieving models allow reduction of outlet
pressure even when the system is dead-ended
Miniature Series 07 Oil Removal
Filter/Regulator 1/8" and 1/4" Port Sizes
ISO Symbols
Automatic Drain
Relieving
Manual Drain
Relieving
Automatic Drain
Non Relieving
Manual Drain
Non Relieving
Ordering Information. Models listed include PTF threads, transparent bowl, relieving diaphragm, gauge, automatic drain, 5 to 100 psig (0.3 to 7
bar) outlet pressure adjustment range* .
Port Size Model Number Flow† scfm (dm 3 /s) Weight lbs (kg)
1/8" B39-102-A0KA 4.0 (1.9) 0.57 (0.26)
1/4" B39-202-A0KA 4.0 (1.9) 0.57 (0.26)
† Maximum flow with 90 psig (6.3 bar) inlet pressure to maintain stated oil removal performance.
Alternative Models
- ★ ★ ★ ★ ★ ★ - 3 ★ B 9
Threads Substitute
PTF A
ISO Rc taper B
ISO G parallel G
Drain Substitute
Automatic A
Manual M
Element Substitute
Coalescing 0
Bowl Relief Type Gauge Substitute
Transparent Relieving Without 01
Transparent Relieving With 02
Transparent Non-relieving Without 03
Transparent Non-relieving With 23
Metal Relieving Without 33
Metal Relieving With 34
Metal Non-relieving Without 35
Metal Non-relieving With 36
Outlet Pressure Adjustment Ranges* Substitute
1 to 10 psig (0.1 to 0.7 bar) A
5 to 50 psig (0.3 to 3.5 bar) E
5 to 100 psig (0.3 to 7 bar) K
5 to 125 psig (0.3 to 8.6 bar) L
* Do not use these units to control pressures outside of the specified ranges.
Port Size Substitute
1/8 " 1
1/4 " 2