beautypg.com

B64g, Warning, Service kits – Norgren B64G Series User Manual

Page 4: Bracket mounting, Bracket kit reference

background image

N/AL.8.240.300.04

7/97

B64G

Our policy is one of continuous research and development.

We reserve the right to amend, without notice, the specifications given in this document.

Warning

These products are intended for use in industrial compressed air

systems only. Do not use these products where pressures and
temperatures can exceed those listed under ‘Technical Data’.

Before using these products with fluids other than those specified, for

non-industrial applications, life-support systems, or other applications not
within published specifications, consult NORGREN.

Through misuse, age, or malfunction, components used in fluid

power systems can fail in various modes. The system designer is warned
to consider the failure modes of all component parts used in fluid power
systems and to provide adequate safeguards to prevent personal injury or
damage to equipment in the event of such failure.

System designers must provide a warning to end users in the

system instructional manual if protection against a failure mode
cannot be adequately provided.

System designers and end users are cautioned to review specific

warnings found in instruction sheets packed and shipped with these
products.

Water vapor will pass through these units and will condense into

liquid if air temperature drops in the downstream system. Install an air
dryer if water condensation could have a detrimental effect on the
application.

Service Kits

Item

Type

Part Number

Service kit

Relieving

4383-200

Non relieving

4383-201

5 µm

4338-01

Replacement elements

25 µm

4338-99

40 µm

4338-02

Replacement Sight Glass

Prismatic (standard)

4380-040

Pyrex

4380-041

Replacement Drains

Automatic

3000-97

Manual

684-84

Service kit includes diaphragm assembly, valve assembly,
valve spring, louvre o-ring, bowl o-ring, drain seal.

143 (5.63)

114 (4.49)

8,2 (0.32)

85 (3.35)

11 (0.43)

14,5 (0.57)

93 (3.66)

30,5 (1.20)

48 (1.89)

110 (4.33)

Bracket Mounting

Use 8 mm (5/16

"

) screws to mount bracket to wall.

Bracket Kit Reference

Item

Part Number

Wall Bracket

7

4504-50