Norgren 97100 NAMUR Series - Manual (Page 8)

N/en 5.4.372.08
97100 NAMUR
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. © 2013 Norgren GmbH
2004-5152c
9/13
Single connection plate
Model: 0612790
NAMUR slot
Model: 0612791
Yoke
Model: 0540593
19
12 12
34,5
104
21 27 ш 9
ш 14,5
25,5 M 5 (4x)
41
25,5
16
16
11,5
19
10 12
29
35
30
19
60
ш 5,5
ш 9,5
G 1/4
19
G 1/4
19
41
60°
11
51
9,5
5 12
5,5
5,5
20 5
12
65
2x
50
M 5
41
Silencer
Model: M/S1, C/S1
Warning
These products are intended for use in industrial compressed air
systems only. Do not use these products where pressures and
temperatures can exceed those listed under ‘Technical features’.
Before using these products with fluids other than those specified,
for non-industrial applications, life-support systems, or other
applications not within published specifications, consult NORGREN.
Through misuse, age, or malfunction, components used in fluid
power systems can fail in various modes. The system designer is warned to consider the failure modes of all
component parts used in fluid power systems and to provide adequate
safeguards to prevent personal injury or damage to equipment in the
event of such failure.
System designers must provide a warning to end users in the system
instructional manual if protection against a failure mode cannot be
adequately provided.
System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with these products.
ш 12,5
34
6,5
1/8”