KWorld Kanvus Note A5 - Manual (Page 148)

63
Installing Tablet Software
1. Turn on your computer and start the Windows.
2.
Place the CD disc into the CD/DVD ROM drive
and the main installation screen will appear
automatically (See figure at the right).
Select “Tablet Software Setup”, and press the
“Enter” key to start the Tablet Software installation.
3.
The
“Tablet Software” dialog box will appear with
the software selection. Tick the software you want
to install and confirm the installation location.
Then, press “OK” to install.. You may also change
your destination folder at the “Copy to” section.
4.
After the installation is completed, you will see a
message indicating the setup of software is
successful. Then,
press “OK” to finish software
installation.
To use the Tablet software, you must install the Driver first and
then install the Tablet Software. (For more information about the
installation of driver, please refer to the included Driver Installation
Manual.)