Cirrus Logic CRD48L10 - Manual (Page 43)

1
Chapter 14
Schematic, Layout, BOM
The design files for the CRD48L10_4in4out are included in the crd48l10_4in_4out.exe installer. When installed in the SDK
install directory, the schematic can be found in the following directory:
\schematics\crd48l10_4in4out_Rev_X
Because each revision of a board has its own directory, the ‘X’ in the file name above indicates the board revision that
matches the revision of the board being used. The board revision is etched in copper on the bottom side of the board.
The schematics directory will contain:
• The schematic in a smart PDF format
• The schematic in PADS 9.2 format
• The layout in PADS 9.2 format
• The gerber layers in PDF format
• The BOM in XLS format