Cirrus Logic CRD48L10 - Manual (Page 12)

3
2.3 Digital Control Probe Points
2.3 Digital Control Probe Points
2.3.1 DSP Control
• Connector Type: 100-MIL Male Header (5x2)
• Absolute Maximum Input Signal Level: +6.5 V
• Absolute Minimum Input Signal Level: –0.5 V
• Maximum Signal Output Level: +V_PROBE
• Reference Designators: JP3 (CTRL HDR), TP15
2.3.2 DSP Debug
• Connector Type: 100-MIL Male Header (4x1)
• Absolute Maximum Input Signal Level: +2.0 V
• Absolute Minimum Input Signal Level: –0.5 V
• Maximum Signal Output Level: +1.8 V
• Reference Designators: TP10
2.3.3 DSP Interrupts
• Connector Type: 100-MIL Male Header (4x1)
• Absolute Maximum Input Signal Level: +2.0 V
• Absolute Minimum Input Signal Level: –0.5 V
• Maximum Signal Output Level: +1.8 V
• Reference Designators: TP1
2.3.4 Codec Reset
• Connector Type: 100-MIL Male Header (5x2)
• Absolute Maximum Input Signal Level: +6.5 V
• Absolute Minimum Input Signal Level: –0.5 V
• Maximum Signal Output Level: +V_PROBE
• Reference Designators: TP15
2.3.5 Codec I 2 C
• Connector Type: 100-MIL Male Header (4x1)
• Absolute Maximum Input Signal Level: +2.0 V
• Absolute Minimum Input Signal Level: –0.5 V
• Maximum Signal Output Level: +1.8 V
• Reference Designators: TP11
2.3.6 Codec Interrupt
• Connector Type: 100-MIL Male Header (5x2)
• Absolute Maximum Input Signal Level: +2.0 V
• Absolute Minimum Input Signal Level: –0.5 V
• Maximum Signal Output Level: +1.8 V
• Reference Designators: TP15