RADWAG Scales of WPT series - Manual (Page 60)

16. USER CALIBRATION
Only for non-verified scales
Confirmation of high accuracy of weighing requires periodical correcting
of calibration factors in the scale memory – this is adjustment of the
scale. Calibration should be performed when we start weighing or
dynamic change of temperature occurs. Before starting calibration
remove loads from the pan.
16.1. Calibration
Procedure:
• Enter the submenu and then:
• Following inscriptions will appear
• A new start mass is adjusted during this period of time.
After that a mass of calibration weight is shown (e.g. 3 000kg).
- 60 -